X Series Manual Desiccant Air Dryers

X Series

Manual Desiccant Air Dryers

Request a Quote Download Spec Sheet

X-Series Owner's Manual desiccant dryers offer the most cost effective method to remove moisture form very low flow compressed air systems or those which are only used infrequently. Atmospheric dew points as low as -100°F are obtainable with units available for flows up to 25 SCFM. These dryers are an excellent choice for point-of-use applications such as paint spraying, laboratory instruments and small control air systems.

Standard Features:
  • Lowest initial cost of any type dryer
  • Low pressure drops of less than 1 PSIG
  • Easily and quickly serviced
  • Color change of indicating silica gel or moisture indicator provide an instant status of the dryer
  • No power required
  • Units are small, lightweight and easy to install
  • Color-change silica gel can be regenerated for reuse
General Specifications:
X06
Transparent Bowl		 X03
Transparent Bowl		 X03
Metal Bowl		 X04
Transparent Bowl		 X25
Metal Bowl
Maximum Pressure 150 PSIG
Maximum Temperature 125°F 150°F 125°F 150°F
Maximum Continuous Airflow * 5 SCFM 10 SCFM 25 SCFM
Total Airflow * 600 SCF 4400 SCF 3168 SCF 4400x2 SCF 11000 SCF
Weight with Desiccant 1.13 lbs 7.4 lbs 6.8 lbs 15.0 lbs 11.2 lbs
Desiccant Weight 0.25 lbs 1.8 lbs 1.3 lbs 3.6 lbs 4.4 lbs
Total Minutes of Operation @ Max Continuous Air Flow 120 min 440 min 316 min 880 min 440 min
* With Dry Desiccant at 100 PSIG and 70°F, Saturated Inlet (100% RH)
Silica Gel 4A Molecular
Sieve		 Transparent
Bowl		 Metal
Bowl		 Port Size
X06-02-000 ● ● 1/4" NPT
X06-02-U00 ● ●
X03-02-000 ● ●
X03-02-M00 * ● ●
X03-02-MU0 * ● ●
X03-02-U00 ● ●
X03-04-000 ● ● 1/2" NPT
X03-04-M00 * ● ●
X03-04-MU0 * ● ●
X03-04-U00 ● ●
X04-02-000 ● ● 1/4" NPT
X04-02-M00 * ● ●
X04-02-U00 ● ●
X25-04-000 ● ● 1/2" NPT
X25-04-U00 ● ●
Notes:

Silica gel media provides dry air to -45°F Atmospheric Dew Point. Media can be regenerated @ 350°F.

4A molecular sieve media provides dry air to -100°F Atmospheric Dew Point. Media can be regenerated @ 600°F.

* Moisture Indicator is recommended - Part# DRP-95-623