P4200W Series Dehydrators
Up to 4200 SCFD
NEBS Compliant
| Standard Features: |
|---|
|
| Optional Features: | |
|---|---|
|
|
| Accessories: | |
|---|---|
|
|
| General Specifications: | ||||||
|---|---|---|---|---|---|---|
| P4200W | P4200WLP | P4202W | P4202WLP | |||
| Output Capacity | Normal: 2,600 SCFD (74 SCMD) Continuous Maximum: 4,200 SCFD (119 SCMD) Emergency |
|||||
| Power Requirements (15 Amp Service Recommended) |
110 - 125 VAC, 50/60 Hz | 220 - 230 VAC, 1-Phase, 50/60 Hz | ||||
| Running Amps | 8.6 Amps | 3.9 Amps | ||||
| Outlet Pressure Range | 5 - 20 PSIG (35 - 138 KPa) |
0.30 - 10 PSIG (2 - 69 KPa) |
5 - 20 PSIG (35 - 138 KPa) |
0.30 - 10 PSIG (2 - 69 KPa) |
||
| Outlet Air Relative Humidity | Less than 2% RH | |||||
| Compressor Type | Two-Cylinder, 3/4 HP, Oil-less Type | |||||
| Dehydrating Method | Heatless Desiccant | |||||
| Environment Operatating Temperature Range | 40° - 85°F (5° - 30°C) Ambient *Unit will go into SHUTDOWN Mode if Cabinet Temperature exceeds 120°F (49°C) |
|||||
| Noise Level | 63 dBA at 3’ (1 m) | |||||
| Heat Dissipation | 3,500 BTU/hr | 2,900 BTU/hr | ||||
| Alarms | Standard Alarms - Complete readings of all critical measurement points, individual alarm indication display, including SNMP Communication | |||||
| Outlet Connections | 1/2” NPT Female | |||||
| Dimensions | 21” D x 25.5” W x 49” H (53.3 cm D x 64.1 cm W x 124.5 cm H) | |||||
| Weight | 222 lbs (100 kgs) | |||||
| Literature: |
|---|
|
P4200W Series Specification Sheet |
| Guides: |
|
P4200W Series User's Guide P4200W Series Installation Guide P4200W2 Series User's Guide (Metric) for W2 models with Metric-specific Control Boards |
| Firmware Files: *This is the latest production Firmware for our current version Control Boards ONLY. Please Contact Altec AIR for all other Product Firmware requirements. |
|
P4200W Series Firmware Files |
| SNMP Files: |
|
P4200W Series MIB Files for use with P4200W models using Firmware versions 0.5.4 or newer |